Recrafting An Old Wine Barrel – Finished

Sneak peak on a special order – Part 5

As you may recall, the product that we started with was almost unrepairable.  One end of the old wine barrel had been sitting in dirt for a time and that included mud at some junctures, which in-turn started rotting the wood on the end of the staves.  The owner was willing to go along with whatever was needed so we went to work.

We decided early on that the one bad head or cap would have to be the bottom of the barrel and we would add an extra layer of wood to beef up the barrel.  We struggled a bit getting the old stain off because it’s a bit sticky and gooey when being sanded.  Another issue with the sanding was the uneven surface caused in part by the staves being rotten, which didn’t allow each stave to have equal strength or hold together very well.

By the way, when we say ‘we’ we’re mostly talking about Ron who did a vast majority of the work on this project barrel.

We overcame the extra work and now the staining and sealing we’re next.  Of course prepping is in order first and as we stated, one of the more tedious jobs to do.  The owner of the barrel asked for a darker look which we’ve done before and call leather.  Then it was onto the hoops, which would be painted burgundy.  Everything went well until we decided there was too much pitting and redid one band.

That led us to now, where we cleaned up the barrel by giving the bands a quick buffing.  We looked over the barrel and touched up anything we thought wasn’t right but the owner thought it looked great so we were done.  We should add, the weather was cold and wet at the end of this project making conditions, well, let’s just say a bit of a pain.

Two barrels

BLOG STORY SPECIAL – Ask for these two barrels and receive $100 off the sale. (see below for more info)

Although this was someone else’s cask that we worked on along with being a barrel we wouldn’t normally recraft – hopefully this little five part story offers some insight into what we do to each product we work on and the lengths we will go to make it right.

In the future, Paso Wine Barrels will offer other stories of our work and business as we move along.  If you ever have any questions about wine barrels whether they’re ours or not, ask us and we will try to tender an answer.

As they say in wine country, ‘Saluti’ – or as we say Salootie Patootie!

Ron and Daryle Hier

.

WineBarrelBizCard-background

http://pasowinebarrels.com/

BLOG STORY SPECIAL – Ask for the two barrels shown in the story above and receive $100 off the sale.  Click here to email for details.

CHECK OUT OUR USED BARRELS AS WELL

Advertisements

2 thoughts on “Recrafting An Old Wine Barrel – Finished

  1. Brian

    A lot of sites talk about empty wine barrels shrinking over time. With a refinished barrel, unless you bolt each stave to the hoop, is it inevitable that the bottom hoop is going to eventually fall off? Is it as simple as maintaining some water in the barrel (which i would love to refinish and turn into a table)?

    Like

    Reply
    1. PasoDr Post author

      Hi Brian,
      Apologize for not responding before this. Health issues have us backed up. Regardless, your question about shrinkage is viable. The stain, sealer and varathane though will help with reducing the problem of shrinkage by quite a bit. The bands should not come off if you have four hoop nails positioned equally around the band. Hope this helps and thanks for the question.
      Cheers,
      Daryle

      Like

      Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s